How to setup NOIP for Updating dynamic IP on windows
This is how you can set up NOIP for Updating dynamic IP on windows.
Similar to ngrok there are many alternatives for port forwarding tools on the internet. One such tool is NOIP. If you have a hack that you want to perform over the internet then you can use NOIP which works on windows as well as Linux.
This guide is for windows. Check out the Linux guide for the Linux NOIP setting.
Table of contents
What is NOIP?
Dynamic IP addresses are a real headache for hackers and network engineers. Once the modem restarts, 99 % of the time you will be getting a new public IP address which means any hack you had previously done is no longer valid since your IP has changed.
What if you could connect with something that doesn’t change no matter how many times the IP address changes? That’s where NOIP comes into the picture
NOIP is a dynamic DNS service that constantly maps your IP public address to the target device with a free hostname. It updates at regular intervals of time.
This is done by a client software called DUC or Dynamic Update Client. Now instead of mapping the hack to your public IP, you map it with the hostname you select.
So what if we wanted to make the hack work anywhere in the world and we do not have an expensive server and also we do not have a router. How can we do it?
Well NOIP is the solution you are looking for to update your public IP automatically in hacks
Must read:
Software required:
NOIP (Download here)
Step 1:
We need dynamic IP for hacking to work over the internet, so go to noip.com and sign up. After signing up log in to your account.
Click on create Hostname and enter any name for the host. Click on save the host.
Step 2:
Now Download DUC from the official website or click here. Install the DUC client and sign in to your account.
Step 3:
Once you do the IP address for your system will automatically be updated in the DNS. In case this doesn’t happen, you can manually configure the DNS. You need to see the image as shown in step 4.
Step 4:
Click on add hosts on the DUC client as shown. If done correctly, you will get all three green ticks. Once everything is set up as needed all 3 green ticks will be added.
Set the correct host
All the settings are set.
Step 5:
Now, while setting up the commands for hacking instead of your local IP use the ddns you just made on NOIP.
So in my case, it would be nightfury007.dns.net instead of 192.168.182.136
Check out the below example of hacking with Metasploit:
Before
WITH NOIP:
Step 6:
If you are having any issues with the no IP client. Do not use it instead, just directly use your public IP. Port forwarding is required by default on all hacking methods over the internet. The only alternative is ngrok.
Make sure to open the corresponding port in the router settings for the hack to work:
I hope you liked the article. Keep sharing and supporting the website. If you have any issues mention them in the comment section.
